How to Repair a Rusted Front Floor
of a 1951-1955 Kaiser

Page 3

While we have the body on the "rotor" we'll media-blast the
entire undercarriage.

After media-blasting the floor, several spots of serious rust-out is now evident.

We'll start with this right side (passenger) floor.

Mark the area to be cut out.  Be sure to mark all of the rust-damaged area back to good solid metal.

Transcribe this pattern to the floor patch panel as shown below.
(A piece of stiff poster board is helpful in making this pattern)

Next, mark the area into several smaller pieces to make removal easier.

Copyright © 2005-2007 William P. Brown, HC 65 Box 49, Altonah, Utah 84002  Tel: 435-454-3098